P037F Glow Plug Sense Circuit High
OBD-II Trouble Code Technical Description
Red Seal Certified Technician
Glow Plug Sense Circuit High
What does that mean?
This diagnostic trouble code (DTC) is a generic powertrain code, which means that it applies to OBD-II equipped vehicles that have glow plugs (diesel engine vehicles). Brands of vehicles may include but are not limited to Ford, Dodge, Mazda, VW, Ram, GMC, Chevy, etc. Although generic, the specific repair steps may vary depending on make/model/engine. Anecdotally this code seems more common on Ford vehicles.
The glow plugs and their associated harnesses and circuits are part of a system that is responsible for generating heat in the combustion chamber prior to cold startups.
Essentially , the glow plug is similar to an element on a stove-top. These are incorporated in diesel engines because diesel engines do not use a spark plug to ignite the fuel/air mixture. Rather, they use compression to generate enough heat to ignite the mixture. For this reason, diesel engines need the glow plugs' help on cold starts.
The ECM throws P037F and associated codes when it monitors a condition outside of a specific range within the glow plug circuit. Most of the time, I would say this would be an electrical issue but some mechanical problems could affect your glow plug circuit on some makes and models. P037F Glow Plug Sense Circuit High code is set when the ECM monitors one or more high electrical value within the circuit.
An example of a glow plug:
NOTE: If other dash lights are currently illuminated (e.g.: traction control, ABS, etc.), this may be a sign of another potentially bigger problem. In this case, you should bring your vehicle to your reputable shop where they can plug in with a proper scan tool to avoid doing any unnecessary harm.
What is the severity of this DTC?
Generally speaking, the severity of this code would be moderate but depending on the scenario, it may be severe. For example, if you reside in moderate to extreme cold conditions, repetitive cold starts with malfunctioning glow plugs will eventually cause unnecessary damage to your internal engine components.
What are some of the symptoms of the code?
Symptoms of a P037F engine code may include:
- Hard starts in the morning or when cold
- Abnormal engine noises on start-up
- Poor performance
- Engine misfiring
- Poor fuel mileage
What are some of the common causes of the code?
Causes for this code may include:
- Broken or damaged wiring harness
- Fusible link burnt/defective
- Glow plug defective
- ECM issue
- Pin/connector problem. (e.g. corrosion, overheating, etc.)
What are some troubleshooting steps?
Be sure to check for technical service bulletins (TSBs) for your vehicle. Getting access to a known fix can save you time and money during diagnosis.
Whenever you are working with electrical systems, some of the basic tools that are a good idea to have are:
- OBD code reader
- Basic socket set
- Basic ratchet and wrench sets
- Basic screwdriver set
- Rag/shop towels
- Battery terminal cleaner
- Service manual
- Let engine cool
- Chalk wheels
- Wear PPE (Personal protective equipment)
Basic Step #1
First thing i would do in this situation, would be pop the hood and smell for any kind of irregular burning scents. If present, this may be the trail to your problem. Most times, if there is excessive burning smells it means something is overheating. Carefully follow the smell, if you see any burnt wire coatings or melting plastic around fuse boxes, fusible links, etc. this will need to be addressed first.
NOTE: Visually inspect all ground straps and look for corroded or loose ground connections.
Basic Step #2
Locate and follow the glow plug circuit harness. These harnesses are exposed to extreme heats that may damage wire looms which are there to protect your wires. Especially keep an eye for any spots the harness that may rub on the engine or other components. Repair any damaged wires or looms.
Basic Tip #3
If possible, disconnect your glow plug harness from the plugs. In some cases, you can disconnect it from the the other side of the harness as well and remove it completely from the vehicle as an assembly. If this is the case, You can use your multimeter to verify continuity in the individual wires of the circuit. This would rule out and kind of physical problem within that harness. In some vehicles, this may not be possible. If not, skip step.
NOTE: Make sure to disconnect battery before performing any electrical repairs.
Basic Step #4
Test your circuits. Refer to manufacturer for specific desired electrical values. Using your multimeter there may be numerous tests you could perform to verify the integrity of the circuits involved.
Basic Step #5
Test your glow plugs. Unplug harness' from plugs. Using your multimeter set to Voltage, you will attach one end to the positive battery terminal and using the other end, you will touch the tip of each plug. The values should be the same as battery voltage, if they are not, this would indicate a problem within the plug itself. This may vary depending on make and model of your particular vehicle, so ALWAYS refer to manufacturer service information FIRST.
Related P037F DTC Discussions
- There are currently no related topics in our forums. Post a new forum topic now.
Need more help with a P037F code?
If you still need help regarding the P037F trouble code, please post your question in our FREE car repair forums.
NOTE: This information is presented for information purposes only. It is not intended as repair advice and we are not responsible for any actions you take on any vehicle. All information on this site is copyright protected. If you want to share this article or information with others, please link to this page, don't copy and paste it elsewhere.