1996 Chevy Astro 2wd P0102

joelwolverine · **Joined:** Wed Sep 03, 2008 3:28 pm **Posts:** 3

I have a 1996 Astro Van with trouble code P0102 Maf low input. Replaced MAF Sensor and checked the wires, new TP sensor and cleaned out the throttle, still clear the code and comes back instantly. The van turns on, but stubbles and then grabs back on but it does not die. It only dies when you shifted in reverse, and then turns right back on, after that works Fine.

Sponsored Links · **Joined:** 29 Jun 2004 08:12 pm **Posts:** N/A

joelwolverine · **Joined:** Wed Sep 03, 2008 3:28 pm **Posts:** 3

The only other thing that I can replace and think of is the Computer, or the PCM I know its rare but this van has 277,000 miles on it.

joelwolverine · **Joined:** Wed Sep 03, 2008 3:28 pm **Posts:** 3

Can anybody help me

jeff compton · **Posted:** Wed Sep 10, 2008 11:40 am

I'd suggest you stil have a poor quality MAF, a voltage issue on the wires too it or something else causing the MAF code! ie, restrictted exhaust, vaccum leak, holes in the intake snorkel to the MAF etc!

asecmt · **Posted:** Wed Sep 10, 2008 4:49 pm

what brand maf did you use? do you have any data to show you what the MAF is doing

1996 Chevy Astro 2wd P0102

Who is online